Gadget
Firmware for the Waveshare ESP32-S3-Touch-AMOLED-1.43C, installed from this page over USB.
Install
The board is not in the list
- Plug the board into this computer with a USB cable that carries data; some cables only charge.
- If its screen is dark, touch it or press BOOT: a sleeping board may not show up.
- Close anything else that may hold the port:
mpremote, Thonny, a serial monitor, another tab with this page. - Still missing? Start it in download mode. Waveshare's way: hold BOOT, then press PWR to power on.